In this article we will simply discuss the VIZIO Sound Bar Bass Adjustment in detail.
A soundbar performs at its best when it has adequate settings enabled in it. These settings can be known to us with the help of the user manual that one gets alongwith the soundbar model. These settings can be precisely referred to as the ‘Equalizer settings’.
Yes, equalizer settings enhance the performance of the soundbar to 10 folds and can be easily identified by using the user manual of the soundbar. Among the equalizer settings one of the major settings is the bass setting. The bass settings is basically very important when it comes to a soundbar as it makes the musical experience more enhancing and enjoyable.
VIZIO Sound Bar Bass Adjustment Steps
Follow the following steps to adjust bass on your vizio soundbar:
Take on your VIZIO Soundbar remote control.
Now, locate the BASS button on your remote control.
Press the bass button on the remote control of your VIZIO Soundbar for almost 3-4 seconds.
You will notice the LEDs of the soundbar getting flared out.
Now, locate the CENTER button on the remote control.
Press the CENTER button.
Now, use the Next/Previous buttons on your remote control to increase or decrease the bass value as per that given in the VIZIO soundbar equalizer settings given in the user manual.
Remember, that the LED lights will move to the right when you increase the level of bass and to the left when you decrease the level of bass.
How to Adjust Bass On Vizio Soundbar without Remote
The simple steps to adjust bass levels on VIZIO soundbar without the help of a remote can be summarised below:
On your soundbar you will see a “Menu” button.
Press it “ON“.
The, on the connected TV screen you will see the message “BT” displayed.
Now, press the “Down” button.
Press until you get the “Bass” option.
Then, press the “Fast forward” button to increase or decrease the level of bass.
Read also: Best Settings For Bose Soundbar 700
If you wish to have a thrilling sound experience out of your soundbar then remember to set the treble more than the bass. This is because both these inputs have different functions. If we set high one of the inputs then the other needs to be set at a lower end in order to have a balanced equation of output sound. So, in a nutshell we can say that bass and treble settings are inversely related to one another.
Now, some general bass settings as per the standards of a VIZIO Soundbar can be summarized below in a few pointers:
The bass level is indicated by the position of the two center LEDs present on the soundbar.
The bass range is -5 to -6 for a VIZIO Soundbar.
Also, with these settings in operation the treble should be set in the range of +5 to +6.
You can check our detailed review on theBest Soundbar for Vizio TV, best soundbar with deep bass and best soundbar for Music.
Read also: Best Settings for LG Sound Bar
Frequently Asked Questions (FAQs)
Should bass be more than treble?
No, the bass value should never be more than the treble. This is because both have different and opposite characteristics. So, if we need to have a good idea about their standard values an then move on with the settings.
Can high bass damage ears?
Yes, a high bass is prone to damage ears. This is because bass has sound range near to 90-95 dB and as a matter of fact a constant sound exposure to a sound level of 85 dB is sure to cause hearing loss or other hearing problems.
You can also visit our below guides:
Bass VS Treble
Best Bass and Treble Settings for Soundbar
How to Adjust Bass on Bose 700 Subwoofer
Why My Vizio Sound Bar Bass Too Loud?
Bose Bass Module 700 Setup
What is Bass in Music?
How to Balance Bass and Treble?
Conclusion
The understanding of the equalizer settings is very crucial for the best sound output of a VIZIO Soundbar. So, whenever you purchase a soundbar check its equalizer settings in the user manual and then try to adjust those values in the soundbar using the respective settings.
The bass, treble, frequencies and the rear sound settings are very crucial in these aspects. For a VIZIO soundbar the bass range that best suits it is the -5 to -6 range. Also remember to keep the treble always lower than the bass.
Also read: Best Settings for VIZIO 5-1 Soundbar
Mia Evelyn
Mia Evelyn is a soundbar specialist and she love to test and review different soundbar brands. She shares her neutral and in-depth reviews through the Soundbar Mag.
Under the Soundbar section, tap the + or – buttons to adjust the bass or treble levels in increments of 10 (from -100 to 100). If a bass module is connected to the soundbar, its output level can also be adjusted by tapping the + or – buttons under the Bass Module section.
For the best surround sound experience, position the sound bar, subwoofer, and surround sound speakers as shown. The sound bar should be close to ear level. Note: Do not block the subwoofer port. Sound bar should be centered below the TV.
SRS TruVolume™ ensures a TV viewing experience with fewer volume fluctuations and SRS TruSurround HD™ delivers immersive surround sound without rear speakers. Simply connect the included audio cable to your TV and indulge in powerful, immersive audio. EASY UPGRADE. SERIOUS SOUND.
start with both treble and bass at zero or middle position, often sound systems including sound bars sound most pleasing (especially at low volumes ref fletcher/Munson) with a slight boost in bass and a slight boost of treble. You should use your ears. Your ears know what sounds good.
If the content you're watching doesn't have any deep bass tones, your subwoofer might simply not have any audio to play. Another quick fix to try is unplugging both the Soundbar and the subwoofer, then reconnecting the power cord to both devices and giving it another go.
Bass Frequencies: The best EQ settings for bass often involve adjustments within the 60Hz to 250Hz range. Midrange: Adjustments between 250Hz and 500Hz can add warmth without muddiness. High Frequencies: Tweaking above 500Hz can brighten the sound and add clarity to vocals and instruments.
Both of the soundbar's rubber feet should rest firmly and fully on the surface. An unsteady surface can lead to unwanted vibrations and affect sound quality. Improper height and direction. Your soundbar should face the listening area and match the ear level of your primary viewing position.
It's pretty awesome and provides the best sound quality. Using HDMI ARC, your TV can send audio to the Soundbar using an HDMI cable which is the best cable to use when possible.
If your TV has an HDMI input that supports "Audio Return Channel" (ARC) then the Sound Bar will be turned on and off when your turn the TV on and off. Also, the volume of the sound bar will be controlled via the TV volume control. The HDMI input on your TV will be labeled HDMI (ARC).
How should I adjust my equalizer if I want to focus on bass tones? Focusing on bass tones involves more than just cranking up the bass. You'll want to boost frequencies around 60Hz to 250Hz and consider slightly reducing the mid-range frequencies to prevent muddiness.
Introduction: My name is Mr. See Jast, I am a open, jolly, gorgeous, courageous, inexpensive, friendly, homely person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.
![VIZIO Sound Bar Bass Adjustment [Best Guide] (1)](https://i0.wp.com/www.soundbarmag.com/wp-content/uploads/2022/10/How-to-Adjust-Bass-On-Vizio-Soundbar-without-Remote.jpg "VIZIO Sound Bar Bass Adjustment [Best Guide] (1)")
![VIZIO Sound Bar Bass Adjustment [Best Guide] (2)](https://i0.wp.com/www.soundbarmag.com/wp-content/uploads/2023/08/pexels-christina-morillo-1181686-2-scaled.jpg "VIZIO Sound Bar Bass Adjustment [Best Guide] (2)")
![VIZIO Sound Bar Bass Adjustment [Best Guide] (2024)](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAEAAAABCAQAAAC1HAwCAAAAC0lEQVR42mP8/h8AAvMB+NzmkbcAAAAASUVORK5CYII=)